Wolf GB08 Mistral User Handbook

Version: v03_2022-05-02

Table of Contents:

• General Dimensions
• Steering Wheel
• Cockpit
• Recommended Engine Values
• Engine Fire-up
• Cooling Temperature Management with Turbo Engine
• First Shakedown
• Chassis Setup
• Reference Points for Height Measure
• Setup Setting
• Tires and Rims
• Brakes
• Antiroll Bars
• Damper Adjustment
• Front Suspension Geometry
• Rear Suspension Geometry
• Rear Wing Adjustment
• Checking and Replacing Components
• Tightening Torque
• Checking Engine Oil Level
• Cooling Circuit Filling
• Gearbox
• Oil and Lubricant
• General Agreement

General Dimensions:

• Dry Weight: 520 kg
• Wheelbase: 2679 mm
• Tow Point and Lifting Point (configuration dependent)

Steering Wheel:

• Radio communication, pitlane limiter, rain light, fuel consumption reset, light flashing, starter, and boost functions are controlled through buttons on the steering wheel.
• Different pages for race settings, qualify settings, and checking various parameters.

Cockpit:

• IGNITION switch with off, on, and ignition positions.
• DOWNLOAD plug for data download and ECU mapping.
• Brake bias adjustment and extinguisher controls.

Recommended Engine Values:

• Peugeot 1.1-1.6 Turbo engine specifications.
• Range Alarm for RPM, water temperature, oil temperature, oil pressure, and battery voltage.

Engine Fire-up:

• Step-by-step guide for starting the engine, including checking oil pressure and fuel pressure.

Cooling Temperature Management with Turbo Engine:

• Instructions for managing water temperature to prevent ECU cut-off and potential damage.

First Shakedown:

• Post-delivery steps including inspection, warm-up, installation lap, bodywork removal for fluid leaks, and performance testing.

Chassis Setup:

• Reference points for height measurement and setup settings for slick tires and rain tires, including tire pressures and adjustments.

Tires and Rims:

• HANKOOK slick tires with specifications for front and rear tires and rims.

Brakes:

• Bedding procedure for discs and pads.

Antiroll Bars:

• FRONT ARB spring configurations with max deflection, spring stack height, stiffness, and max preload.

Damper Adjustment:

• BUMP REBOUND settings for dampers.

Suspension Geometry:

• Front and rear suspension geometry details.

Rear Wing Adjustment:

• Adjustments for rear wing.

Checking and Replacing Components:

• Post-race/daily test and yearly checks, including chassis bolts, air filter cleaning, intercooler air cleaning, and brake bleeding.
• Replacement schedule for oil, oil filter, gearbox oil, coils, and spark plugs.

Tightening Torque:

• Torque specifications for components such as wheel nuts, front wheel stud/CV joint nut, upright stud nut, and more.

Checking Engine Oil Level:

• Procedure for checking engine oil level with the engine warmed up.

Cooling Circuit Filling:

• Instructions for filling the cooling circuit and bleeding air from the circuit.

Gearbox:

• Refer to the "SLR82-14 Gear Box Technical Details" handbook for technical information.

Oil and Lubricant:

• Specifications for engine oil, gearbox oil, and brake fluid.

Engine Cooling:

• Total Glacelf mixed with distilled water for engine cooling.

General Agreement:

• Legal disclaimers regarding motorsport, safety components, and warranty limitations.